Build or Compile Linphone from Source for iPhone and iPad

Thank you very much for that superb article

Hi,

I tried your suggestion but im getting the error

make[5]: *** [mediastream] Error 1
make[4]: *** [all-recursive] Error 1
make[3]: *** [all] Error 2
make[2]: *** [all-recursive] Error 1
make[1]: *** [all] Error 2
make: *** [build-linphone] Error 2

Any suggestion how I can fix it?
Ricky

Hi,
Thank you very much.

I got 2 Error if I build for simulator:
warning: directory ‘/Users/mac/linphone-iphone/submodules/build/Debug-iphonesimulator’ following -L not found

ld: library not found for -llinphone
collect2: ld returned 1 exit status

Command/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.2 failed with exit code 1

and 2. error at make:

libmsilbc.a (no such file or directory)

What I done wrong?

Thank you,
Jasi

Hi,

I can’t run on simulator?
only with device?get error
the debug-iphonesimulator not found.

how to rid of this error?

Jasi

Hey Jasi,
It seems that you are missing msilbc (the msiIBC plugin developed by linphone.org) , hence the libmsilbc.a missing error. I would suggest downloading linphone-iphone project again.

Thanks for sharing this nice post.I will keep your article in my idea.usbonlinegroup

Hi ,I am getting issue of
syntax error: unexpected end of file in iphone-config.site file,

plz help me , i run make all command in build directory .

Regards
Naveed

hi! iphone-config.site issue is now fixed but now i am getting issue of md4_dgst.c file,

error : expected ) instead of ;

this kind of message i m facing now

plz guide me

Hi Jessica,

Thanks for your kindness to share these information on internet.

I am also building linphone recently. And I get a issue as I execute “make”…the system response me that

: command not foundetktop/linephone-iphone/submodules/build..//build/iphone-config.site: line2:

: command not foundetktop/linephone-iphone/submodules/build..//build/iphone-config.site: line6:

: command not foundetktop/linephone-iphone/submodules/build..//build/iphone-config.site: line34: syntax error: unexcepted end of file

make[1]: *** [build-openssl] Error 1
make: *** [all] Error 2

and my iphone-config.site goes like this
//————————————
# -*- shell-script -*-

GCC_VERSION=4.2
SDK_VERSION_MAJOR=4
SDK_VERSION=3.2

if test “${host_alias}” = “i386-apple-darwin” ; then
PLATFORM=Simulator
ARCH=i386
elif test “${host_alias}” = “armv6-apple-darwin” ; then
ARCH=armv6
PLATFORM=OS
elif test “${host_alias}” = “armv7-apple-darwin” ; then
ARCH=armv7
PLATFORM=OS
else
echo “bad host ${host_alias} must be either i386-apple-darwin or armv6-apple-darwin”
exit
fi
echo “Loading config.site for iPhone platform=${PLATFORM} version=${SDK_VERSION}”

SDK_PATH_LIST=`ls -drt /Developer/Platforms/iPhone${PLATFORM}.platform/Developer/SDKs/iPhone${PLATFORM}4*`
SDK_BIN_PATH=/Developer/Platforms/iPhone${PLATFORM}.platform/Developer/usr/bin
for SYSROOT_PATH in $SDK_PATH_LIST ; do echo $SYSROOT_PATH ; done ;
echo “Selecting SDK path = ${SYSROOT_PATH}”
CC=”${SDK_BIN_PATH}/gcc-${GCC_VERSION} -std=c99 -arch ${ARCH} -isysroot ${SYSROOT_PATH} -miphoneos-version-min=${SDK_VERSION} -DTARGET_OS_IPHONE”
CXX=”${SDK_BIN_PATH}/g++-${GCC_VERSION} -arch ${ARCH} -isysroot ${SYSROOT_PATH} -miphoneos-version-min=${SDK_VERSION} -DTARGET_OS_IPHONE”
LD=”${SDK_BIN_PATH}/ld-${GCC_VERSION} -arch ${ARCH}”
AR=${SDK_BIN_PATH}/ar
RANLIB=${SDK_BIN_PATH}/ranlib

CPPFLAGS=”-Dasm=__asm”
LDFLAGS=”-Wl,-syslibroot,${SYSROOT_PATH} -framework CFNetwork”
//————————————

Could you please guide me to figure out what’s the problem ?
Thank you very much.

Best Regards,
Jim Lu

I had already resolve my issues.
Now I can build and modify the linphone-iphone on my Lion with XCode 4.1.

Thanks guys.

Hi,
I am getting below error : I am using macport 2.0.1

externals/exosip/configure: line 12616: syntax error near unexpected token `OSIP,’

externals/exosip/configure: line 12616: `PKG_CHECK_MODULES(OSIP, libosip2 >= 3.4, ,’

/build-i386-apple-darwin/externals/exosip/Makefile] Error 2

Please help

Hi.I get the latest linphone-iphone version,follow the Readme,when “make all”,get two error,it seems that “GNU assembler not found, install gas-preprocessor”.
Did you use the latest version? And are you successful?

Hi,

I have compiled the linphone libraries and successfully compiled the project for iPhone simulator 5.0 also.

But when I try to compile for iPad simulator 5.0 its not working. Its compiling successfully but getting paused in between with blank screen. Says “Program received signal “EXC_ARITHMETIC”.

And when I try to put on iPad 2 device it gives some compilation error..
…………………………
“Undefined symbols for architecture armv7:
“___aeabi_idiv”, referenced from:
_SKP_Silk_schur64 in libSKP_SILK_SDK.a(SKP_Silk_schur64_arm.o)
ld: symbol(s) not found for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)
…………………………………………………

Any ideas on this?

Hi;

I have compiled the liblinphone-iphone successfully. While I am trying to run the mediastream application, I am getting errors such as

Redefinition of VideoStream symbol as different kind of symbol

in mediastream.h file.

Any insight to this issue?

I greatly appreciate this blog! Please post more tutorials…

hi! I get linphone-iphone source from git://git.linphone.org/linphone-iphone.git today.
But after port install all things following this article and in readme file, I compile using “make -f builder-iphone-simulator.mk all && make -f builder-iphone-os.mk all &&make -f builder-iphone-os.mk delivery-sdk”, it say that:

command not foundr/Desktop/linphone-iphone/submodules/build/..//build/iphone-config.site: line 2:
/Users/administrator/Desktop/linphone-iphone/submodules/build/..//build/iphone-config.site: line 42: syntax error: unexpected end of file

Plz help me…

Addional information:
I’m using Lion 10.7.2 and I have tried to build for sdk 4.3 and 5.0 (I also edit SDK in iphone-config.site)

regarding to make command, please download command line tools from apple developer

Hi all,
I have the following error :

ld: library not found for -llinphone

I’m running on Lion with xcode 4.3.2
please help.
thank you

compile and run perfectly on April 03 2012 fresh download linphone and macport. using Lion.
today (April 27) fail to compile a fresh copy from linphone git.

I keep getting the following error:
Libtool : Version mismatch error. This is libtool 2.4.2 but the definition of this LT_INT comes from an older release. You should recreate aclocal.m4 with macros from libtool 2.4.2 and run autoconf again.

Hi,
Its a very helpful tutorial you gave through it.

When i try to build xproj file using xcode i was getting those error :

1) /Users/harshsavani/linphone-iphone/liblinphone-sdk/apple-darwin/share/sounds/linphone/ringback.wav: No such file or directory

and

2) /Users/harshsavani/linphone-iphone/liblinphone-sdk/apple-darwin/share/sounds/linphone/rings/oldphone-mono.wav: No such file or directory

I have followed couple of solutions, blog and tutorial to make it run successfully with xcode 4.5

I have followed your tutorial and download linphone from all valide resource but having some errors related to library on OSX Lion

ld: library not found for -lavcodec

in some copy this.
ld: library not found for -llinphone

I allow Macport and followed everything from terminal but failure to run app on device nor on Simulator. I am totally exhausted in rectifying solution for 3 days but failure to do so, please help me as your help will be highly appreciated.

Hi i’m trying to compile linphone-iphone module on Mac LION and getting following errors :

/Users/mac_11/linphone-iphone/submodules/build/..//build/iphone-config.site: line 2:: command not found
/Users/mac_11/linphone-iphone/submodules/build/..//build/iphone-config.site: line 52: syntax error: unexpected end of file
make: * [build-openssl] Error 1

Please help me out.

Hi i’m trying to compile linphone-iphone module on Mac Mountain Lion. Xcode version 4.5. I followed the steps given in this page. I successfully crossed upto step4.

In Step5, I executed the command “make -f builder-iphone-simulator.mk all && make -f builder-iphone-os.mk all &&make -f builder-iphone-os.mk delivery-sdk”.
I got the following Error:

checking whether res_ndestroy is declared… yes
checking for antlr3… no
configure: error: Could not find antlr.jar. Please install antlr3
make[1]: *** [/Hubino/SIP_Implementation/IOS/workspace/linphone-iphone/submodules/build/../build-i386-apple-darwin/belle-sip/Makefile] Error 1
make: *** [build] Error 2

Please help me,
Thank you.

Hello

I am getting this error :

SILK_SDK_SRC_v1.0.9/SILK_SDK_SRC_FIX_v1.0.9/.: No such file or directory
make[3]: *** [SILK_SDK_SRC_v1.0.9/SILK_SDK_SRC_FIX_v1.0.9] Error 1

While making the linphone sdk.

Any idea whats wrong here.

Thanks

Howdy! I realize this is sort of off-topic however
I needed to ask. Does managing a well-established website such
as yours require a lot of work? I am brand new to running
a blog however I do write in my diary everyday. I’d like to start a blog so I can easily share my own experience and feelings online. Please let me know if you have any kind of recommendations or tips for new aspiring bloggers. Appreciate it!

Hello Admin

I succesfully compiled the project for iPhone simulator but when i try to run the same on device it gives me following error :

ld: archive has no table of contents for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)

I am using xcode 4.6 ios sdk 6.1 and Mac OS Lion.

Any idea whats going wrong?

Thanks & Regards

Hello
i have following error.

bignum.c:959:9: warning: implicit declaration of function ‘asm’ is invalid in C99
[-Wimplicit-function-declaration]
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:5: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:969:9: error: expected ‘)’
MULADDC_STOP
^
../include/polarssl/bn_mul.h:161:9: note: expanded from macro ‘MULADDC_STOP’
: “=m” (t), “=m” (c), “=m” (d), “=m” (s) \
^
bignum.c:959:9: note: to match this ‘(‘
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:8: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:980:9: error: expected ‘)’
MULADDC_STOP
^
../include/polarssl/bn_mul.h:161:9: note: expanded from macro ‘MULADDC_STOP’
: “=m” (t), “=m” (c), “=m” (d), “=m” (s) \
^
bignum.c:974:9: note: to match this ‘(‘
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:8: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:987:9: error: expected ‘)’
MULADDC_STOP
^
../include/polarssl/bn_mul.h:161:9: note: expanded from macro ‘MULADDC_STOP’
: “=m” (t), “=m” (c), “=m” (d), “=m” (s) \
^
bignum.c:985:9: note: to match this ‘(‘
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:8: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:938:44: warning: unused parameter ‘s’ [-Wunused-parameter]
static void mpi_mul_hlp( size_t i, t_uint *s, t_uint *d, t_uint b )
^
bignum.c:938:65: warning: unused parameter ‘b’ [-Wunused-parameter]
static void mpi_mul_hlp( size_t i, t_uint *s, t_uint *d, t_uint b )
^
3 warnings and 3 errors generated.
make[2]: *** [bignum.o] Error 1
make[1]: *** [lib] Error 2
make: *** [build-polarssl] Error 2

Have you ever thought about adding a little bit
more than just your articles? I mean, what you say is important and everything.

But think about if you added some great pictures or videos to give your posts more, “pop”!
Your content is excellent but with images and clips,
this website could undeniably be one of the greatest in its field.
Very good blog!

Hi Admin,

Can you help me with my problem, I often get this error below.. I have tried few times redownloading from the GIT but still giving me the same error..

/usr/bin/install -c -D SILK_SDK_SRC_v1.0.9/SILK_SDK_SRC_FIX_v1.0.9/libSKP_SILK_SDK.a /Files/Linphone09102013/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/lib/libSKP_SILK_SDK.a
/usr/bin/install: illegal option — D
usage: install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode]
[-o owner] file1 file2
install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode]
[-o owner] file1 … fileN directory
install -d [-v] [-g group] [-m mode] [-o owner] directory …
make[5]: *** [install-data-local] Error 64
make[4]: *** [install-am] Error 2
make[3]: *** [install] Error 2
make[2]: *** [install-recursive] Error 1
make[1]: *** [build-mssilk] Error 2
make: *** [build] Error 2

Please advise. Thanks a lot

hi , i`m a coder, can you give me a demo about linphone. thanks.

Thanks for such a wonderful post. i have followed all the steps mentioned above.

I am try to run command:
$ make -f builder-iphone-simulator.mk all && make -f builder-iphone-os.mk all &&make -f builder-iphone-os.mk delivery-sdk

got below response:

make -f builder-iphone-simulator.mk enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no all \ && make -f builder-iphone-os.mk enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no all \
&& make -f builder-iphone-os.mk host=armv7s-apple-darwin enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no all \
&& make -f builder-iphone-os.mk delivery-sdk
mkdir -p /LiniPhone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/include
mkdir -p /LiniPhone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/lib/pkgconfig
mkdir -p /LiniPhone/submodules/build/../build-i386-apple-darwin/externals/polarssl
cd /LiniPhone/submodules/build/../build-i386-apple-darwin/externals/polarssl/ && \
rsync -rvLpgoc –exclude “.git” /LiniPhone/submodules/build/..//externals/polarssl/ .
building file list … done

sent 13275 bytes received 20 bytes 8863.33 bytes/sec
total size is 4031899 speedup is 303.26
host_alias=i386-apple-darwin && . //LiniPhone/submodules/build/..//build/iphone-config.site && \
cd /LiniPhone/submodules/build/../build-i386-apple-darwin/externals/polarssl && make CC=”$CC” AR=”$AR” CPPFLAGS=”$CPPFLAGS” lib && make install DESTDIR=/LiniPhone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin
//LiniPhone/submodules/build/..//build/iphone-config.sit: command not found
//LiniPhone/submodules/build/..//build/iphone-config.site: line 56: syntax error: unexpected end of file
make[1]: *** [build-polarssl] Error 1
make: *** [build] Error 2

Please help me.

its very clear document to download activated linphone in iOS
before downloading the application,
1)check xcode and mac os x versions.
2)install command line tools
3)install mac ports use above doc.
4)use every command in above document at the time of downloading

hi, i downloaded iphone src from linphone. but i cant able to debug thr src. it showing error. the files inside the include folfers are in red color.and showing file not found. plz help me. sent me one working code.

Thanks Admin, but now my problem is the file inside the include folder is showing redcolor, it means it is missing. plz help me.
the file such as “linphonecore.h etc……

/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: -dynamic not specified the following flags are invalid: -ObjC
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: can’t locate file for: -lSKP_SILK_SDK
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: -lSKP_SILK_SDK is not an object file (not allowed in a library)
Command /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool failed with exit code 1

I use XCODE- 4.6.3
ios- 6.1
macoOS- 10.8 Moutain lion on Virtualbox
When i build and run linphone.xcodeproj it have a erro: file linphone-banner.png : no such find and directory.
Anybody help me?

Thanks for your kindness to share these information on internet.

I use: Mac OS 10.8 + xcode 4.6.3 + Simulator 6.1 SDK

I am also building linphone recently. And I get a issue as I execute “make all”…the system response me that
: command not foundetktop/linephone-iphone/submodules/build..//build/iphone-config.site: line2:
: command not foundetktop/linephone-iphone/submodules/build..//build/iphone-config.site: line59: syntax error: unexcepted end of file
make[1]: *** [build-polarssl] Error 1
make: *** [build] Error 2

——————————————————————————-
and my iphone-config.site goes like this:
# -*- shell-script -*-

SDK_VERSION_MAJOR=4
SDK_VERSION=4.0
MCPU=””
if test “${host_alias}” = “i386-apple-darwin” ; then
PLATFORM=Simulator
ARCH=i386
CMAKE_OPTS=”-DCMAKE_SYSTEM_PROCESSOR=i386″
MCPU=””
elif test “${host_alias}” = “armv6-apple-darwin” ; then
ARCH=armv6
PLATFORM=OS
CMAKE_OPTS=”-DCMAKE_SYSTEM_PROCESSOR=arm”
MCPU=”-mcpu=arm1176jzf-s”
elif test “${host_alias}” = “armv7-apple-darwin” ; then
ARCH=armv7
PLATFORM=OS
CMAKE_OPTS=”-DCMAKE_SYSTEM_PROCESSOR=arm”
MCPU=”-mcpu=cortex-a8″
elif test “${host_alias}” = “armv7s-apple-darwin” ; then
ARCH=armv7s
PLATFORM=OS
CMAKE_OPTS=”-DCMAKE_SYSTEM_PROCESSOR=arm”
else
echo “bad host ${host_alias} must be either i386-apple-darwin or armv[6,7,7s]-apple-darwin”
exit
fi
echo “Loading config.site for iPhone platform=${PLATFORM} version=${SDK_VERSION}”
XCODE_DEV_PATH=`xcode-select -print-path`
#new path with Xcode 4.3:
if test -d ${XCODE_DEV_PATH}/Platforms/iPhone${PLATFORM}.platform/Developer/SDKs ; then
SDK_PATH_LIST=`ls -drt ${XCODE_DEV_PATH}/Platforms/iPhone${PLATFORM}.platform/Developer/SDKs/iPhone${PLATFORM}*`
SDK_BIN_PATH=${XCODE_DEV_PATH}/Platforms/iPhone${PLATFORM}.platform/Developer/usr/bin
else
SDK_PATH_LIST=`ls -drt /Developer/Platforms/iPhone${PLATFORM}.platform/Developer/SDKs/iPhone${PLATFORM}*`
SDK_BIN_PATH=/Developer/Platforms/iPhone${PLATFORM}.platform/Developer/usr/bin
fi

for SYSROOT_PATH in $SDK_PATH_LIST ; do echo $SYSROOT_PATH ; done ;
echo “Selecting SDK path = ${SYSROOT_PATH}”

COMMON_FLAGS=” -arch ${ARCH} ${MCPU} -isysroot ${SYSROOT_PATH} -miphoneos-version-min=${SDK_VERSION} -DTARGET_OS_IPHONE=1 -D__IOS -fms-extensions”
CC=”xcrun clang -std=c99 $COMMON_FLAGS”
OBJC=”xcrun clang -std=c99 $COMMON_FLAGS”
CXX=”xcrun clang++ $COMMON_FLAGS”
LD=”xcrun ld -arch ${ARCH}”
AR=”xcrun ar”
RANLIB=”xcrun ranlib”
STRIP=”xcrun strip”
NM=”xcrun nm”

CPPFLAGS=”-Dasm=__asm”
OBJCFLAGS=”-x objective-c -fexceptions -gdwarf-2 -fobjc-abi-version=2 -fobjc-legacy-dispatch”
#Force install script to use -C so that header files don’t get re-written if not changed.
INSTALL_DATA=”ginstall -C”

Could you please guide me to figure out what’s the problem ?
Thank you very much.
Best Regards,

Hello im am getting this error can you please help I’m new to xCode and cannot figure out what is wrong. You have replied to another person asking for the same problem. Please help me out.
Thanks

host_alias=i386-apple-darwin && . //Users/talha/Desktop/linphone-iphone/submodules/build/..//build/iphone-config.site && \
cd /Users/talha/Desktop/linphone-iphone/submodules/build/../build-i386-apple-darwin/externals/polarssl && make CC=”$CC” AR=”$AR” CPPFLAGS=”$CPPFLAGS” lib && make install DESTDIR=/Users/talha/Desktop/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin
//Users/talha/Desktop/linphone-iphone/submodules/build/..//build/iphone-config.s: command not found
//Users/talha/Desktop/linphone-iphone/submodules/build/..//build/iphone-config.site: line 59: syntax error: unexpected end of file
make[1]: *** [build-polarssl] Error 1
make: *** [build] Error 2

I’m trying to build linphone SDK for iPhone, and I’ve installed all the perquisites and dependencies ( exactly as said here and in the README file ). When I try to make the linphone-SDK ( Using make all command ) I get the following error :

make -f builder-iphone-simulator.mk enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no enable_ffmpeg=yes all \
&& make -f builder-iphone-os.mk enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no enable_ffmpeg=yes all \
&& make -f builder-iphone-os.mk host=armv7s-apple-darwin enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no enable_ffmpeg=yes all \
&& make -f builder-iphone-os.mk delivery-sdk
mkdir -p /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/include
mkdir -p /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/lib/pkgconfig
make[1]: *** No rule to make target `/Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//externals/polarssl/Makefile’, needed by `update-tree’. Stop.
make: *** [build] Error 2

Would you please help me with some solutions ? I have no idea what that “needed by update-tree” means !

Hi,

Regarding that first problem, I figured out that my connection had been interrupted while I was cloning the source using GIT access. Re-fetching everything solved the problem.

But for the problem I’ve stuck with currently, I used “make veryclean” and “make all” again to reproduce the complete error, and here’s the complete log error :

make -f builder-iphone-simulator.mk enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no enable_ffmpeg=yes all \
&& make -f builder-iphone-os.mk enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no enable_ffmpeg=yes all \
&& make -f builder-iphone-os.mk host=armv7s-apple-darwin enable_gpl_third_parties=yes enable_zrtp=no enable_opus=yes enable_debug=no enable_ffmpeg=yes all \
&& make -f builder-iphone-os.mk delivery-sdk
mkdir -p /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/include
mkdir -p /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/lib/pkgconfig
mkdir -p /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/../build-i386-apple-darwin/externals/polarssl
cd /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/../build-i386-apple-darwin/externals/polarssl/ && \
rsync -rvLpgoc –exclude “.git” /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//externals/polarssl/ .
building file list … done
.gitignore
CMakeLists.txt
ChangeLog
DartConfiguration.tcl
LICENSE
Makefile
README
doxygen/
doxygen/polarssl.doxyfile
doxygen/input/
doxygen/input/doc_encdec.h
doxygen/input/doc_hashing.h
doxygen/input/doc_mainpage.h
doxygen/input/doc_rng.h
.
.
.
( I reduced the file list to make the log shorter 🙂 )
.
.
.
visualc/VS6/sha2sum.dsp
visualc/VS6/ssl_cert_test.dsp
visualc/VS6/ssl_client1.dsp
visualc/VS6/ssl_client2.dsp
visualc/VS6/ssl_server.dsp
visualc/VS6/ssl_test.dsp

sent 3967998 bytes received 8750 bytes 2651165.33 bytes/sec
total size is 3936742 speedup is 0.99
host_alias=i386-apple-darwin && . //Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//build/iphone-config.site && \
cd /Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/../build-i386-apple-darwin/externals/polarssl && make CC=”$CC” AR=”$AR” CPPFLAGS=”$CPPFLAGS” lib && make install DESTDIR=/Users/Unkn0wn/Developer/GIT/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin
Loading config.site for iPhone platform=Simulator version=4.0
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator7.0.sdk
Selecting SDK path = /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator7.0.sdk
CC aes.c
CC arc4.c
CC asn1parse.c
CC asn1write.c
CC base64.c
CC bignum.c
bignum.c:959:9: warning: implicit declaration of function ‘asm’ is invalid in C99 [-Wimplicit-function-declaration]
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:5: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:969:9: error: expected ‘)’
MULADDC_STOP
^
../include/polarssl/bn_mul.h:161:9: note: expanded from macro ‘MULADDC_STOP’
: “=m” (t), “=m” (c), “=m” (d), “=m” (s) \
^
bignum.c:959:9: note: to match this ‘(‘
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:8: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:980:9: error: expected ‘)’
MULADDC_STOP
^
../include/polarssl/bn_mul.h:161:9: note: expanded from macro ‘MULADDC_STOP’
: “=m” (t), “=m” (c), “=m” (d), “=m” (s) \
^
bignum.c:974:9: note: to match this ‘(‘
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:8: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:987:9: error: expected ‘)’
MULADDC_STOP
^
../include/polarssl/bn_mul.h:161:9: note: expanded from macro ‘MULADDC_STOP’
: “=m” (t), “=m” (c), “=m” (d), “=m” (s) \
^
bignum.c:985:9: note: to match this ‘(‘
MULADDC_INIT
^
../include/polarssl/bn_mul.h:52:8: note: expanded from macro ‘MULADDC_INIT’
asm( ” \
^
bignum.c:938:44: warning: unused parameter ‘s’ [-Wunused-parameter]
static void mpi_mul_hlp( size_t i, t_uint *s, t_uint *d, t_uint b )
^
bignum.c:938:65: warning: unused parameter ‘b’ [-Wunused-parameter]
static void mpi_mul_hlp( size_t i, t_uint *s, t_uint *d, t_uint b )
^
3 warnings and 3 errors generated.
make[3]: *** [bignum.o] Error 1
make[2]: *** [lib] Error 2
make[1]: *** [build-polarssl] Error 2
make: *** [build] Error 2

Hi I tried to clone the repository.. it prints following error on terminal

Clone of ‘git://git.code.sf.net/p/opencore-amr/code’ into submodule path ‘submodules/externals/opencore-amr’ failed

After a long time I was able to clone the repository but now the error is in libtool as below, I have libtool installed..

You must have libtool installed to compile libxml.
Download the appropriate package for your distribution,
or see http://www.gnu.org/software/libtool
make[1]: *** [/Users/admin/linphone-iphone/submodules/build/..//externals/libxml2/configure] Error 1
make: *** [build] Error 2

file not found

Hello,
this might be a foolish question but can anyone show me how to download Linphone with g729 for my iphone 4S? (not jailbroken).
Greetings from Venezuela

Or is there a free version of anyother softphone available with g729 that you know of?

Hello this is kinda of off topic but I was wanting to know if blogs use WYSIWYG editors or if you have to manually
code wit HTML. I’m starting a blog soon but have noo
coding knowledge so I wanted to get advice from someone with experience.
Any help would be enormously appreciated!

This thing is driving me totally nuts 0_o

How could possibly be so difficult to compile something? I am resolving issue after issue, the last one was mediastreamer2 configure file syntax error, opened the file with sublime text, removed a space, saved and then different error: make[1]: *** [build-linphone] Error 2 with no other indication. Really?

Thanks for the article, most helpful.
One missing codec problem I had was solved http://comments.gmane.org/gmane.comp.voip.linphone.devel/1435
It appears you need to sudo port install nasm to solve.

Hello Admin,
i just followed your steps and its pretty worked for me… thanks for your steps.
Now i integrated libs in my project and i had successfully compiled and ran in both ios 6 and ios7.1 devices.. now i can call through sip with ios 6.. but i am not able to get register in ios 7.1.. everytime it says NEW REGISTRATION STATE: ‘LinphoneRegistrationFailed’ (message: ‘Unauthorized’)… is it some issue with arm64 OR with zRTP? does this linphone SDK work with ios 7.1? and i am also getting warning like ARM function not 4-byte aligned: __b_evaluation from liblinphone-sdk/apple-darwin/lib…

i am not able to find any clue with that… because this is perfect working with ios 6.1.. 🙁

Please help me on it..
Thanks

Hello there, I do believe your blog might be having
web browser compatibility problems. Whenever I
look at your blog in Safari, it looks fine but when opening in I.E., it’s
got some overlapping issues. I merely wanted to provide you
with a quick heads up! Aside from that, excellent website!

Thanks So Much Jess! Super usefull!! Good to see there are more technologist informatics women out there.

Jessica First Thank You for this post!!!
But I have an error:
‘/Users/sbyrdsell/Linphone/tmp/linphone-iphone/submodules/build/..//../liblinphone-sdk/i386-apple-darwin/include/polarssl’
/bin/sh: ginstall: command not found
make[5]: *** [install-polarsslHEADERS] Error 127
make[4]: *** [install-am] Error 2
make[3]: *** [install-recursive] Error 1
make[2]: *** [install-recursive] Error 1
make[1]: *** [build-polarssl] Error 2
make: *** [broadcast_all] Error 2

I have looked on the net for ginstall but cannot find it even from MacPorts
sudo port install ginstall
Error: Port ginstall not found

Can you help?

Also has anyone worked with the SDK I’m looking to you this in my app but there are NO examples out there…..

Thanks
Stan

Greetings from Los angeles! I’m bored to tears at work so I decided
to browse your blog on my iphone during lunch break. I really like the knowledge you present here and can’t
wait to take a look when I get home. I’m amazed at how fast your
blog loaded on my mobile .. I’m not even using WIFI, just
3G .. Anyways, excellent site!

I’m new to iOS Development but I know C#, Python and Java. I’m looking to integrate Linphone into IOS project via Swift programming language.

I found a build of Linphone with all security features enabled at: https://github.com/guardianproject/linphone-ios-secure

I build and ran the hello-world with no errors but nothing came up in the simulator.

What is the best way to start my project, I’ve created my storyboard to pass by configuration for my SIP account. I include all Lib’s and h files in my build setting and it compile with no errors.

My goal is to programmatically place a video call using Linphone.

Does anyone have a sample Swift or Objective-C XCode 6 project or code snippet?

Thanks in advance!!!!!
Stan

Hi,
My question is:
localhost:~ qu$ sudo ls /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs
Password:
ls: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs: No such file or directory

Why “No such file or directory”? But I found iPhoneOS SDK 7.1 at /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs I don’t know.Can you help me?

Hello admin,
I have MAC version 10.9, XCode version 5.1.1.
I want to integrate Linphone version 2.1.2 in my iOS project. I tried everything but could not integrate it. There are so many files missing. Can you tell me the step by step process to integrate Linphone version 2.1.2 in my iOS project.

Hi Jessica,

Just to thank you for following Linphone on IOS from the beginning.

Jehan

It’s hard to find your posts in google. I found it on 11 spot, you should
build quality backlinks , it will help you to increase traffic.
I know how to help you, just type in google – k2 seo tips and tricks

Thanks you very much.You help me a lot!

Hi Jessica,

First, thanks for your this blog , but I follow your step can’t build the linphone lib , below is the error , can you help me ? Thanks .

Linking CXX static library libzrtpcpp.a
cd /Users/chirpchirping/downloads/linphone-iphone/submodules/build-i386-apple-darwin/externals/zrtpcpp/src && /opt/local/bin/cmake -P CMakeFiles/zrtpcpp.dir/cmake_clean_target.cmake
cd /Users/chirpchirping/downloads/linphone-iphone/submodules/build-i386-apple-darwin/externals/zrtpcpp/src && /opt/local/bin/cmake -E cmake_link_script CMakeFiles/zrtpcpp.dir/link.txt –verbose=1
CMAKE_AR-NOTFOUND cr libzrtpcpp.a CMakeFiles/zrtpcpp.dir/ZrtpCallbackWrapper.cpp.obj CMakeFiles/zrtpcpp.dir/ZIDFile.cpp.obj CMakeFiles/zrtpcpp.dir/ZIDRecord.cpp.obj CMakeFiles/zrtpcpp.dir/ZRtp.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpCrc32.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketCommit.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketConf2Ack.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketConfirm.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketDHPart.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketGoClear.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketClearAck.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketHelloAck.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketHello.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketError.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketErrorAck.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketPingAck.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketPing.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketSASrelay.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpPacketRelayAck.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpStateClass.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpTextData.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpConfigure.cpp.obj CMakeFiles/zrtpcpp.dir/ZrtpCWrapper.cpp.obj CMakeFiles/zrtpcpp.dir/Base32.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/ZrtpDH.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/hmac256.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/sha256.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/hmac384.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/sha384.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/AesCFB.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/openssl/InitializeOpenSSL.cpp.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/twofish.c.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/twofish_cfb.c.obj CMakeFiles/zrtpcpp.dir/libzrtpcpp/crypto/TwoCFB.cpp.obj
Error running link command: No such file or directory
make[4]: *** [src/libzrtpcpp.a] Error 2
make[3]: *** [src/CMakeFiles/zrtpcpp.dir/all] Error 2
make[2]: *** [all] Error 2
make[1]: *** [build-zrtpcpp] Error 2
make: *** [build] Error 2

Grate JOB!!!!

Hi there! Quick question that’s completely off topic.
Do you know how to make your site mobile friendly? My site looks weird when viewing from my iphone.
I’m trying to find a template or plugin that might be
able to correct this issue. If you have any recommendations, please share.
Thank you!

I have followed your link and successfully build the project,it works fine.Now 1 question .Linphone soft phone (on appstore)is only 10 mb.How to reduce the size of the project ( so that i can integrate linphone sdk to my project.).I followed this link http://stackoverflow.com/questions/11609763/how-to-integrate-linphone-into-an-existing-project-sip-in-ios?rq=1
Now i have a project of 146 mb from which i can make calls ,do you know how to reduce the size further so that it will be successfully operating.

Thanks you very much. Your post is really helped us. But i am having small problem. Can you please tell me how to solve. When i followed your steps finally i got message like

***************************************************************************
*****CAUTION, this liblinphone SDK is built using 3rd party GPL code ******
*****Even if you acquired a proprietary license from Belledonne ******
*****Communications, this SDK is GPL and GPL only. ******
*****To disable 3rd party gpl code, please use: ******
*****make enable_gpl_third_parties=no ******
***************************************************************************
***************************************************************************

But when i run the application i am seeing following errors anything i did mistake? Thanks in advance.

Undefined symbols for architecture armv7:
“_ms_filter_has_method”, referenced from:
_qos_analyzer_on_action_suggested in liblinphone.a(quality_reporting.o)
“_ms_bitrate_controller_get_qos_analyzer”, referenced from:
_linphone_reporting_call_state_updated in liblinphone.a(quality_reporting.o)
“_ms_qos_analyzer_get_name”, referenced from:
_linphone_reporting_call_state_updated in liblinphone.a(quality_reporting.o)
“_ms_qos_analyzer_set_on_action_suggested”, referenced from:
_linphone_reporting_call_state_updated in liblinphone.a(quality_reporting.o)
“_audio_stream_started”, referenced from:
_call_ringing in liblinphone.a(callbacks.o)
“_ms_load_plugins”, referenced from:
_sip_setup_register_all in liblinphone.a(sipsetup.o)
“_ms_yuv_buf_init_from_mblk”, referenced from:
MSOpenH264Encoder::feed() in libmsopenh264.a(msopenh264enc.o)
“_rfc3984_pack”, referenced from:
MSOpenH264Encoder::feed() in libmsopenh264.a(msopenh264enc.o)
“_rfc3984_set_mode”, referenced from:
MSOpenH264Encoder::initialize() in libmsopenh264.a(msopenh264enc.o)
“_WelsDestroySVCEncoder”, referenced from:

etc…

Hi,

I just downloaded the code, and followed the instructions to compile. But when I tried to run in xcode, it shows a bunch of warnings of deprecations, and along with some other fatal errors. It seems I have cloned a very old version. The “news”file says it’s Version 2.0 and published in 2012….How can I download the latest version?

Thanks
Bonan

Hi Jessica,
Thanks for replying.
I made a fresh clone, and then “git pull”. It showed “Already up-to-date.”
then I rebuild the sdk, and opened it in xcode. Then the error came back again:

Can’t find /Users/bonanzhang/Desktop/linphone_new/linphone-iphone/liblinphone-sdk/apple-darwin/share/pixmaps/linphone/linphone-banner.png
Command /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/copypng failed with exit code 1

I have the following error:

libtool: Version mismatch error. This is libtool 2.4.2, but the
libtool: definition of this LT_INIT comes from libtool 2.4.
libtool: You should recreate aclocal.m4 with macros from lib tool 2.4.2

Please advice.

I have same issue please help.

Hi Jessica,
I followed your instruction down to the Step 7, but got the following error which I have no clue to fix it. Can you help me? Thank you very much.

Configuring for target ‘x86-darwin10-gcc’
enabling x86
enabling runtime_cpu_detect
enabling mmx
enabling sse
enabling sse2
enabling sse3
enabling ssse3
enabling sse4_1
using yasm
Adding -O3 to CFLAGS
enabling use_x86inc
Adding -fno-strict-aliasing to CFLAGS
Adding -Wall to CFLAGS
Adding -Wdeclaration-after-statement to CFLAGS
Adding -Wdisabled-optimization to CFLAGS
Adding -Wpointer-arith to CFLAGS
Adding -Wcast-qual to CFLAGS
Adding -Wimplicit-function-declaration to CFLAGS
Adding -Wuninitialized to CFLAGS
Adding -Wunused-variable to CFLAGS
Adding -Wno-unused-function to CFLAGS
enabling postproc
enabling webm_io
Unable to invoke compiler: gcc -mmacosx-version-min=10.6 -m32 -arch i386 -O3 -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wdisabled-optimization -Wpointer-arith -Wcast-qual -Wimplicit-function-declaration -Wuninitialized -Wunused-variable -Wno-unused-function

Configuration failed. This could reflect a misconfiguration of your
toolchains, improper options selected, or another problem. If you
don’t see any useful error messages above, the next step is to look
at the configure error log file (config.log) to determine what
configure was trying to do when it died.
make[1]: *** [/Users/home/LinPhone/linphone-iphone/submodules/build/../build-i386-apple-darwin/externals/libvpx/config.mk] Error 1
make: *** [broadcast_all] Error 2

Hi, I am trying to run following comment but it’s not working and giving error.

#sudo port install coreutils automake autoconf libtool intltool wget pkgconfig cmake gmake yasm grep doxygen ImageMagick optipng antlr3 nasm

-bash: port: command not found

I am trying to install it on Mac OS X 10.9

Can you please let me know what can be an issue?

When I am trying to run following command I am getting error as shown. Can you please suggest me what I am doing wrong?

bosleo1:MacPorts-1.9.2 jaidesai$ sudo port install coreutils automake autoconf libtool intltool wget pkgconfig cmake gmake yasm nasm grep doxygen ImageMagick optipng antlr3
Warning: No index(es) found! Have you synced your source indexes?
Error: Port coreutils not found
To report a bug, see

Hi There …

Is there any Guide like this you made for compiling Linphone for Android on MAC OS ?

Can you please post how to build for iPhone arm64 architecture.

Hi Jessia,

Thanks for your help!

By the Way:”你会中文吗”?

/build/linphone.build/Debug-iphoneos/linphone.build/Script-63DCC71D1A07B08E00916627.sh: /Users/fookii/Desktop/linphone_iphone/Tools/git_version.sh: /bin/sh^M: bad interpreter

How to fixed it?,Thanks

Hi,when I am trying to run following command I am getting error.

“sudo ln -s /usr/bin/strings /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/strings”

/bin/sh: ginstall: command not found
make[5]: *** [install-polarsslHEADERS] Error 127
make[4]: *** [install-am] Error 2
make[3]: *** [install-recursive] Error 1
make[2]: *** [install-recursive] Error 1
make[1]: *** [build-polarssl] Error 2
make: *** [broadcast_all] Error 2

I have installed MacPort.And when i run “su -” get “su: Sorry”.

Jessica, can you please help take a look of the errors?

Thanks!

Hi Jessica,

Thank u for ur detailed post,i am able to compile it successfully and it is running on 32 bit devices, code is not getting compiled on 64 bit devices i.e, from iPhone 5s.I am not sure whether I’m missing anything or does Linphone still not supported for 64 bit device??Can u shed some light on my issue.Thanku.

Awesome tutorial Jessica Chiang…. 🙂
after a lot of confusions, at last i did it.. 😀 🙂
Thanks a lot.. 🙂

Hi, Jessica.
I am trying for compile Linphone Source 2.1.2 on iOS 10.9 and Xcode 5.1.1.
But i got the following error. Can you help me?
****************************************************
Bernds-Mac:build bernd$ make all
Broadcasting target ‘all’ to all sub-architectures
make -f builder-iphone-simulator.mk enable_gpl_third_parties=yes enable_zrtp=yes enable_opus=yes enable_debug=no enable_ffmpeg=yes enable_tunnel=no all \
&& make -f builder-iphone-os.mk enable_gpl_third_parties=yes enable_zrtp=yes enable_opus=yes enable_debug=no enable_ffmpeg=yes enable_tunnel=no all \
&& make -f builder-iphone-os.mk host=armv7s-apple-darwin enable_gpl_third_parties=yes enable_zrtp=yes enable_opus=yes enable_debug=no enable_ffmpeg=yes enable_tunnel=no all
builder-iphone-os.mk:105: *** mixed implicit and normal rules. Stop.
make: *** [broadcast_all] Error 2
*******************************************
Waiting for your help quickly.
Thank you very much.

Hi, I have a different problem:
when I did that as the README file to the last step-‘make all’, the error showed:checking for perl >= 5.8.1… 5.16.2
/Users/beryl/Documents/linphone-iphone/submodules/build/..//linphone/mediastreamer2/configure: line 17633: syntax error near unexpected token `MSGFMT,’
../../../linphone-iphone/submodules/build/..//linphone/mediastreamer2/configure: line 17633: ` AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,’
configure: error: ../../../linphone-iphone/submodules/build/..//linphone/mediastreamer2/configure failed for mediastreamer2
make[1]: *** [/Users/beryl/Documents/linphone-iphone/submodules/build/../build-i386-apple-darwin/linphone/Makefile] Error 2
make: *** [broadcast_all] Error 2

Thanks && Regards

Hi,

I have compiled it perfectly, after several try.
But i am getting error (Apple MAsh O linker error) when building it for iphone 5s,6 simulator. In iphone 5 simulator it is working perfectly.

What will be the issue ?

Hi .. this tutorial is very helpful and worked perfectly for mountain lion but when i upgraded my mac with Maverick .
I have successfully installed ports on Maverick 10.9.5 but only left with imageMagick port . How to install this on Maverick 10.9.5 . Please let me know .

Hi Jessica,
I am new to Linphone integration ,getting below error while building linphone sdk at step 7

error: pathspec ‘configure.in’ did not match any file(s) known to git.
make[1]: *** [veryclean-libxml2] Error 1
make: *** [broadcast_veryclean] Error 2
Please help me

Hi All,
Please help me to solve this issue .Getting this issue when i am running “make veryclean” command
issue:
error: pathspec ‘configure.in’ did not match any file(s) known to git.
make[1]: *** [veryclean-libxml2] Error 1
make: *** [broadcast_veryclean] Error 2

Hi Jessica,
I have a problem that if I selected the ZRTP type in setting page. Then I make a call the server said that I didn’t use the ZRTP in fact.Is there any thing else need to do to support ZRTP?
Help Me please!

thanks.. this is very good instruction. i spent a lot of time to compile the linphone SDK and then it works finally. However, when i open the project (either the .xcodeproj or the .xcworkspace), it always shows “ld: library not found for -lPods-KifTests-KIF” looks like the libPods-KifTests-KIF.a is not installed, I followed all instructions such as “sudo gem install cocoapods&& pod setup &&pod init && pod install”. Does any one know how to fix this? I searched online and did not find any helpful information.
many thanks!

@seecah

Hello Seecah/All,

If anyone having same error as Seecah was (e.g. illegal option -D), then please edit following as (under submodules/mssilk/sdk),

sh-3.2# pwd
/var/root/linphone-iphone/submodules/mssilk/sdk
sh-3.2#vi Makefile.am

And replace following line,

$(INSTALL) -D $(silk_src_dir)/$(silk_lib) $(DESTDIR)$(prefix)/lib/$(silk_lib)

with

$(INSTALL) $(silk_src_dir)/$(silk_lib) $(DESTDIR)$(prefix)/lib/$(silk_lib)

Basically /usr/bin/install does not support -D option, hence install script generate this error.

Once you fixed this issue, you can run make veryclean and make all.

Thanks, Manash

Hi Jessica! Thanks for good manual. Please, help me with belle-sip installation:

ld: warning: ignoring file /usr/local/lib/libantlr3c.dylib, file was built for x86_64 which is not the architecture being linked (i386): /usr/local/lib/libantlr3c.dylib
Undefined symbols for architecture i386:
“_ANTLR3_TREE_ADAPTORNew”, referenced from:
_belle_sdpParserNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sdpParser.o)
“_antlr3CommonTokenStreamSourceNew”, referenced from:
_belle_sip_uri_parse in libbellesip_la-belle_sip_uri_impl.o
_belle_sip_header_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_address_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_allow_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_contact_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_from_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_to_parse in libbellesip_la-belle_sip_headers_impl.o
…
“_antlr3LexerNewStream”, referenced from:
_belle_sip_messageLexerNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageLexer.o)
_belle_sdpLexerNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sdpLexer.o)
“_antlr3ParserNewStream”, referenced from:
_belle_sip_messageParserNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_belle_sdpParserNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sdpParser.o)
“_antlr3StackNew”, referenced from:
_belle_sip_messageParserNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_belle_sdpParserNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sdpParser.o)
“_antlr3StringStreamNew”, referenced from:
_belle_sip_uri_parse in libbellesip_la-belle_sip_uri_impl.o
_belle_sip_header_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_address_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_allow_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_contact_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_from_parse in libbellesip_la-belle_sip_headers_impl.o
_belle_sip_header_to_parse in libbellesip_la-belle_sip_headers_impl.o
…
“_antlr3VectorFactoryNew”, referenced from:
_belle_sdpParserNewSSD in libbellesip_generated.a(libbellesip_generated_la-belle_sdpParser.o)
“_antlr3dfapredict”, referenced from:
_cdfa175 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa148 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa138 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa129 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa128 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa119 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa120 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
…
“_antlr3dfaspecialStateTransition”, referenced from:
_cdfa175 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa148 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa129 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa128 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa120 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa106 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa100 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
…
“_antlr3dfaspecialTransition”, referenced from:
_cdfa175 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa148 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa138 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa129 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa128 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa119 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
_cdfa120 in libbellesip_generated.a(libbellesip_generated_la-belle_sip_messageParser.o)
…
ld: symbol(s) not found for architecture i386
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[3]: *** [libbellesip.la] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
————————————

How to handle this?

This is a great awesome explanation.thanks to given this great explanation

Hi,
when I compile linphone with lastest code for 64 bit sdk,I get this error:
configure: error: Could not find antlr3 development files. Please install antlr3 version > 3.2 (libantlr3c-dev on debian/ubuntu systems)

but,I already install antlr3:
cmccmac:build cmcc$ antlr
antlr-3.2 antlr3

Pls help me ,thanks

Hi, Please check 6th instruction??

I fail at git clone git://git.linphone.org/polarssl.git -b linphone

can skip this??

Hello there
I got error below :
&& git clean -f && git reset –hard && rm -f patched.stamp
fatal: Not a git repository: ../../../.git/modules/submodules/externals/libvpx
make[1]: *** [veryclean-libvpx] Error 128
make: *** [broadcast_veryclean] Error 1
Im stock on that for almost 4 days.

Hi Jessica tutorial here !

I have follow this tutorial without problem and now I am encountering a problem with the make all, it says that I don’t have autogen.sh in /bin/sh.

I’m in Yosemite 10.10 / xcode 6.2 /.

Also i had to modify the build-iphone-os.mk because of “** mixed implicit and normal rules.” but it seems that i solved it.

If u can give me a hint it will be really helpfull

Thanks for All

Hi Jessica,
Thank you very much for writing this tutorial and answering all those questions. I also have a question. Following the instructions everything goes well till Xcode step 8.
I use Mavericks 10.9.5 and SDK 8.1. I changed arm7 arm64 to armv7 armv7s but when I compile I get 219 warnings/errors which are the result of missing required architecture i386 in file … etc
I checked http://lists.nongnu.org/archive/html/linphone-developers/2014-12/msg00076.html and http://stackoverflow.com/questions/22323039/arm64-architecture-in-xcode-5-1 but to no avail.
and http://stackoverflow.com/questions/1456185/build-error-missing-required-architecture-i386-in-file and http://stackoverflow.com/questions/5544985/missing-required-architecture-i386-in-file but I’m not getting any further. If you could hint me to a solution it would be very appreciated.
Kind regards

Henk Schoneveld
The Netherlands

superb blog nice one for sharing this. – Dave

Hello this is somewhat of off topic but I was wanting to know if blogs use WYSIWYG
editors or if you have to manually code with HTML. I’m starting a blog soon but have no coding expertise so I
wanted to get advice from someone with experience.
Any help would be enormously appreciated!

Very quickly this web page will be famous among all blogging
and site-building visitors, due to it’s nice articles or
reviews

Excellent weblog here! Additionally your web site rather a lot up very fast!

What web host are you the use of? Can I get your affiliate link on your host?
I want my site loaded up as fast as yours lol